When Replacing The Developing Assembly (Cmyk) - Canon CLC5000 Service Manual

CHAPTER 5 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
Replacement for C/M/Y
32) Execute 'STIR-C/M/Y' as necessary.
(about 1 min)
33) Execute 'INIT-C/M/Y' as necessary.
(about 1 min)
34) Execute 'SINIT-C/M/Y' as necessary.
(about 1 min)
35) Execute 'WINCLR-C, M, or -Y'.
36) Select '1' by executing 'ADJUST >
PASCAL > PASCAL'.
37) Record the result on the service label.
38) Turn off and then on the power switch.
39) Execute 'auto gradation correction (full
correction)' in user mode.
Replacement for Bk Only
32) Execute 'STIR-K'. (about 1 min)
33) Execute 'SINIT-K'. (about 1 min)
34) Execute 'WINCLR-K'.
35) Record the result on service mode.
36) Select '1' by executing 'ADJSUT >
PASCAL > PASCAL'.
37) Turn off and then on the power switch.
38) Execute 'auto gradation correction (full
correction)' in user mode.

2.5.2 When Replacing the Developing Assembly (CMYK)

1) Using 'FUNC > INSTALL' in service
mode, set 'IMNG-REG' to '0'.
2) Replace the developing assembly.
3) Replace the developer of the color in
guestion.
4) Using 'FUNC > INSTALL' in service
mode, set 'IMG-REG' to '1'.
5-28
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001