Canon CLC5000 Service Manual page 738

E050
Cause • Duplex paper jogging guide motor (M23; faulty)
• Duplex paper jogging guide home position sensor (PS29; faulty)
• DC controller PCB (faulty)
Description
0001 The duplexing unit stacking guide home position sensor (PS29)
0002 The duplex paper jogging guide home position sensor (PS29) re-
E061
Cause
Description
Potential Control Fault
high-order 2 digits
xx=00:
xx=01:
xx=02:
xx=03:
xx=04:
Cause • Potential measurement unit (faulty)
• DC controller PCB (faulty)
• Pre-exposure lamp (fault)
Description
xx01 The difference between VD1 measured during the 1st rotation and
xx02 The difference between VD2 measured during the 1st rotation and
xx03 The difference between VL1 measured during the 1st rotation and
xx04 The difference between VL2 measured during the 1st rotation and
Cause • Primary/Pre-primary charging assembly (faulty)
• HVDC (faulty)
• Pre-exposure lamp (faulty)
Description
xx10 The measurement of VD1 is 500 V or higher and, in addition, the
COPYRIGHT © 2001 CANON INC.
does not turn ON within 4 sec after the duplex paper jogging guide
motor (M23) has turned ON.
mains ON for 1 sec or more after the duplexing unit stacking guide
motor (M23) has turned ON.
common error
C
M
Y
Bk
VD1 measured during the 2nd rotation is 30 V or more.
VD2 measured during the 2nd rotation is 30 V or more.
VL1 measured during the 2nd rotation is 30 V or more.
VL2 measured during the 2nd rotation is 30 V or more.
measurement of VD2 is 900 V or higher.
2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
ERROR CODE
E-11