Canon CLC5000 Service Manual page 650

<HV-TR (transfer high-voltage output adjustment by condition)>
DISP COUNTER
ADJUST
FUNC
OPTION
TEST
BODY °C
Indicates the machine internal temperature measured by the environment
sensor.
Remarks Same as the reading under 'DISPLAY > ANALOG'
BODY %
Indicates the machine internal humidity measured by the environment sen-
sor.
Remarks Same as the reading under 'DISPLAY > ANALOG'
BODY g
Indicates the machine internal humidity absolute value (g) measured by the
environment sensor.
Remarks Same as the reading under 'DISPLAY > ANALOG'
TRY-OFS-Y/M/C/K
Adjusts the transfer high-voltage output.
Settings range -5 ~ +5 (standard: 0)
Unit: 1.0 µA
ZONE-A/B/C
Indicates the machine internal humidity absolute value (g) in the three
ranges of A through C.
Note 1: The setting of this item will return to the default value when the PCB is re-
placed or the RAM is cleared, requiring input once again. Be sure to record
any new setting you have made on the service label.
COPYRIGHT © 2001 CANON INC.
<M> <S>
HV-TR-Y 1/4
BODY xxx
˚C
BODY
xxx %
BODY xxx
g
TR-OFS-Y
xxxx
F00-300-25
If you have changed the settings of 'TRY-OFS-C/M/Y/K',
check to make sure that the value of 'TR-#' for each zone is
'0'; otherwise, enter '0'.
2000 2000 2000 2000
<R>
READY
ZONE A
ZONE B 580g
ZONE C 1800g
CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
<P> <F>
READY
0.0g to 580g see 2/4
to 1800g see 3/4
-----g see 4/4
to
S-61