Pickup Operations - Canon CLC5000 Service Manual

Hide thumbs Also See for CLC5000:

Table of Contents

8.3.2 Pickup Operations

The paper placed inside the paper deck is held up by a lifter driven by the paper deck mo-

tor (M8001), and is kept at a specific position.

The control signal from the DC controller PCB of the host copier turns on the deck motor

(M36) and the deck pickup clutch (CL8002); then, the paper deck pickup roller releasing

solenoid (SL8001) turns on so that the pickup roller leaves the surface of the paper.

The pickup/feed roller serves to make sure only one sheet of paper is picked up at a time.

The sheet is moved past the deck sensor, in response to which the deck motor turns off; after

being adjusted for appropriate timing, the sheet is then moved forward to the registration

roller, which controls the sheet so that its leading edge will match the image on the photo-

sensitive drum.

Deck sensor lever

separation roller

2000 2000 2000 2000

CANON CLC5000 REV.0 JAN. 2001

CHAPTER 2 NEW FUNCTIONS

DC controller PCB

pickup clutch

Paper deck motor

pickup roller

pickup roller

Table of Contents

Fy8-13gz-000