Handling Parts Associated With The Laser Unit - Canon CLC5000 Service Manual

CHAPTER 1 GENERAL DESCRIPTION

2.3 Handling Parts Associated with the Laser Unit

Do not introduce a screwdriver or the like (i.e., with a high degree of reflectance) into the
laser path when servicing the areas around the laser unit.
Also, remove watches, rings, and the like to prevent laser light from reflecting to your
eyes.
Extra attention is called for when servicing the inside of covers to which the following
label is attached.
The machine is equipped with a shutter to cut off the path of laser light. The shutter oper-
ates in conjunction with the hopper assembly, and remains open as long as the hopper is set
in the machine, closing when the hopper assembly is slid to the front.
It is even more important to heed the foregoing points when the hopper assembly is inside
the machine or when a shutter opening tool is fitted (after sliding out the hopper assembly).
1-10
F01-203-01
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001