Table of Contents
Advertisement
Maintenance
Your WorkCentre is designed to require only minimum maintenance.
However, everyday use will give rise to the need for a number of simple
care operations.
General care
See Safety Notes and Helpful Hints at the beginning of this manual.
Print cartridge care and precautions
Always keep the print cartridges sealed in their containers until they are
to be used.
Remember to remove the protective tape before inserting the print
cartridge in the printer.
Take care to insert the print cartridge in the correct seat on the print
cartridge carriage (color, left; black, right).
Take care not to get ink on your clothes; the ink in the print cartridge
stains.
Do NOT attempt to refill the print cartridge with ink, as this damages the
print cartridge and the printer.
DO NOT shake the print cartridge. If it does not print, do the cleaning
operations described in Cleaning the print cartridges.
If you think that the number of pages printed with the current print
cartridge is fewer than usual, try cleaning it. If the end of ink condition
persists, the print cartridge is empty and requires replacing.
To guarantee that the print cartridge carriage is in its rest position
when you shut down your WorkCentre, always switch off the
WorkCentre before you switch off the computer. When the
WorkCentre is powered, the print cartridge carriage will
automatically return to its rest position and go into standby mode
after approximately two minutes of inactivity.
50
Advertisement
Table of Contents
