Debug Platform Messaging Application - Cisco WS-C2350-48TD-S Command Reference Manual

debug platform messaging application

debug platform messaging application
Use the debug platform messaging application privileged EXEC command to enable debugging of
application messaging activity. Use the no form of this command to disable debugging.
Syntax Description all
badpak
cleanup
events
memerr
messages
usererr
Although visible in the command-line help, the stackchg keyword is not supported.
Note
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(46)EY
Usage Guidelines The undebug platform messaging application command is the same as the no debug platform
messaging application command.
Related Commands Command
show debugging
Catalyst 2350 Switch Command Reference
B-28
debug platform messaging application {all | badpak | cleanup | events | memerr | messages |
usererr}
no debug platform messaging application {all | badpak | cleanup | events | memerr | messages
| usererr}
Display all application-messaging debug messages.
Display bad-packet debug messages.
Display clean-up debug messages.
Display event debug messages.
Display memory-error debug messages.
Display application-messaging debug messages.
Display user-error debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B Catalyst 2350 Debug Commands
OL-19055-01