Ni-1 Bri Review - Lucent Technologies MERLIN LEGEND Release 6.1 System Planning Manual

MERLIN LEGENDCommunications System Release 6.1
System Planning 555-661-112
G

NI-1 BRI Review

NI-1 BRI Review
G
This appendix contains instructions for completing the NI-1 BRI Planner Form. If
you have questions while completing the form prior to the sale, contact the Sales
and Design Support Center (SDSC) engineers. Once the contract has been
signed and the forms are completed, make a photocopy of the forms for your
records and forward the forms to the technician who will do the installation. The
technician will then fax a copy to the National Service Assistance Center (NSAC)
if any questions or problems occur at the customer site.
The NI-1 BRI Planner form should be used in conjunction with System Form 3i,
Incoming Trunks: BRI Options (800 NI-BRI Module).
Form Needed
NI-1 BRI Planner
Planning Form Instructions
NOTE:
Prior to completing any of the steps below, you should first verify that the
customer's local service provider offers National ISDN-1 BRI service with
ISDN Ordering Code (IOC) standardized capability package "S" and a
separate Multi-Line Hunt (MLH) service, depending on the customer's
requirements. If the Central Office uses a Lucent Technologies 5ESS or
Siemens SSC EWSD switch, MLH is available through the Series
Completion feature. The Multiline Hunt Group (MLHG) feature on these CO
switches is not recommended for use with MERLIN LEGEND. The Northern
Telecom DMS-100 provides MLH service through the MLHG feature. A
customer may want to order several BRI lines, some assigned as IOC
package "S" and the others as MLH.
Issue 1
August 1998
Page G-1
G
G
G