Lucent Technologies MERLIN LEGEND Release 6.1 System Planning Manual page 506

MERLIN LEGENDCommunications System Release 6.1
System Planning 555-661-112
H NI-1 BRI Provisioning
Northern Telecom DMS-100 Switch Translations
Associate new DN with LTID using the NEW command:
SONUMBER
DN
LCC
GROUP
SUBGRP
NCOS
SNPA
KEY
RINGING
LATANAME
LTG
LEN_OR_LTID
DMS-100 normally delivers the Calling Party Number and the Redirecting
Number, if available.
Attach LTIDs to LEN using the SLT command:
SONUMBER
LTID
FUNCTION
LEN
Provision DN2 using the following translations
Define a new Logical Terminal Identifier (LTID) using the SLT command:
SONUMBER<<cr> or $>
LTID
FUNCTION
LTCLASS
CS
PS
MAXKEYS
TEI_TYPE
ABS
ABS
EKTS
<<cr> or $>
< enter DN >
<ISDNKSET>
< enter group name >
< enter subgrp value >
< enter ncos value >
< enter NXX value >
<1>
<Y>
< enter value >
< enter value >
< enter assigned value >
<<cr> or $>
< enter value >
<ATT>
< enter LEN to which LTID will be attached >
< enter identifier value >
<ADD>
<BRAFS>
<Y>
<N>
<64>
<DTEI>
<NOPMD>
<$>
<N>
Issue 1
August 1998
Page H-20
H