Lucent Technologies MERLIN LEGEND Release 6.1 System Planning Manual page 231

MERLIN LEGENDCommunications System Release 6.1
System Planning 555-661-112
4 Features
System Features
9. If restricting extensions, private network calls, and remote access users
from specific routes, locate Form 6g, Call Restriction Assignments and
Lists:
a.
b.
Extension and Remote Access FRL values must be equal to or greater
than the FRL value assigned to routes in order for users to access those
routes. A value of 0 is the most restrictive, and a value of 6 is the least
restrictive. The factory-set FRL value assigned to extensions is 3.
To restrict an extension from specific routes, assign an FRL value to the
extension that is lower than the route's value.
For example, if you want to limit a user from making calls on pools with
special-use lines/trunks such as WATS, assign a value of 0. If you want a
telephone used by a top executive to have unlimited use of any ARS route,
assign a value of 6.
Under the ARS Restriction Level heading on each telephone form,
write the value (0 to 6) you want to assign.
Under the ARS Restriction Level heading on pages 3 and 4 of Form
3a, check the value (0 to 6) you want to assign.
Issue 1
August 1998
Page 4-73