Assigning Telephone Buttons - Lucent Technologies MERLIN LEGEND Release 6.1 System Planning Manual

MERLIN LEGENDCommunications System Release 6.1
System Planning 555-661-112
3 Lines/Trunks

Assigning Telephone Buttons

Assigning Telephone Buttons
This section contains instructions for assigning buttons to:
Telephones in Hybrid/PBX mode
Telephones in Key and Behind Switch mode
DLCs
Forms Needed
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Telephones in Hybrid/PBX Mode
This section contains instructions for assigning the following kinds of buttons to
telephones, or to adjuncts connected to an MLX telephone using an MFM
(excluding QCC operator positions):
System Access Ring (SA Ring) button
System Access Voice (SA Voice) button
System Access Originate Only (SA Orig Only) button
Shared System Access (SSA) button
Personal line button
Pool button
Loudspeaker Paging button
The system automatically assigns certain kinds of line buttons, depending on the
type of equipment. For nonoperator multiline telephones, the system assigns
SA Ring, SA Voice, and SA Orig Only buttons (see
3
3
Figure 3–2 and
Issue 1
August 1998
Page 3-52
3
Figure 3–3).