Lucent Technologies MERLIN LEGEND Release 6.1 System Planning Manual page 456

MERLIN LEGENDCommunications System Release 6.1
System Planning 555-661-112
D T1/PRI Planner
Form Needed
T1/PRI Planner
Planning Form Instructions
1. On page 1, fill in the customer name, telephone number, and address.
2. Fill in the Order Number.
3. Identify the personnel handling the account:
a.
b.
4. Identify the DS1 facility vendor by writing the vendor's name under the
T1/PRI Vendor heading, along with the contact person's name and
telephone number.
5. Under the Installation heading:
a.
b.
6. Under the Installation Contacts heading, list the names and telephone
numbers of the personnel responsible for the equipment order and its
installation:
a.
b.
c.
d.
7. Under the question about whether the order has been placed:
8. On page 2, complete one box for each 100D module by transferring the
options information for each module from the corresponding box on
Form 3b (page 1):
a.
b.
c.
d.
e.
NOTE:
Reference Number is filled in by SDSC.
Account Executive's name and telephone number.
System Consultant's name and telephone number.
Write the "Due Date" on which the installation is scheduled to be
complete.
Write the date the equipment is scheduled for delivery to the
customer in the Materials-on-Job Date space.
(Order) Implementor
SDSC Manager
National Technical Service Center (NTSC) Engineer
Data Services Organization (DSO) Manager
If the order has been placed, check the Yes box and fill in the date.
If the order has not been placed, check the No box.
Service Ordered or Planned (Type of Service)
Frame Format
Switch Type
Line Coding (Suppression)
Line Signaling Mode
f. Synchronization Timing (Clock Synchronization: Source)
Issue 1
August 1998
Page D-2
D
D