Lucent Technologies MERLIN LEGEND Release 6.1 System Planning Manual page 482
Release 6.1
Hide thumbs
Also See for MERLIN LEGEND Release 6.1:
- Feature reference (1021 pages) ,
- System programming manual (1010 pages) ,
- Maintenance and troubleshooting manual (510 pages)
Table of Contents
Advertisement
MERLIN LEGENDCommunications System Release 6.1
System Planning 555-661-112
G
NI-1 BRI Review
To properly order and program NI-1 BRI service, it may be necessary to
contact the local service provider to determine what services are available
and the type of switching equipment used. See Appendix H, "NI-1 BRI
Provisioning" for detailed information that the local service provider may
require in order to supply the necessary connections.
1.
On page 1, fill in the customer name, telephone number, and address.
2.
Fill in the Order Number.
3.
Identify the personnel handling the account:
a.
b.
4.
Identify the NI-1 BRI facility vendor by writing the vendor's name under the
NI-1 BRI Vendor heading, along with the contact person's name and
telephone number.
5.
Under the Installation heading:
a.
b.
6.
Under the Installation Contacts heading, list the names and telephone
numbers of the personnel responsible for the equipment order and its
installation:
a.
b.
c.
d.
7.
Under the question about whether the order has been placed:
8.
On page 2, enter the type of BRI service to be ordered. Since MERLIN
LEGEND Release 4.0 supports only National ISDN-1 BRI (2B+D) service,
enter
9.
Contact the local service provider and determine what type of CO switch
serves your area (such as, Lucent Technologies 5ESS, Northern Telecom
DMS-100, or Siemens SSC EWSD). Enter this information under the Type
of CO Switch heading on page 2 of the form.
NOTE:
Reference Number is filled in by SDSC.
Account Executive's name and telephone number.
System Consultant's name and telephone number.
Write the "Due Date" on which the installation is scheduled to be
complete.
Write the date the equipment is scheduled for delivery to the
customer in the Materials-on-Job Date space.
(Order) Implementor
SDSC Manager
National Technical Service Center (NTSC) Engineer
Data Services Organization (DSO) Manager
If the order has been placed, check the Yes box and fill in the
expected service turn on date.
If the order has not been placed, check the No box.
NI-1 BRI
in the space provided under the Type of Service heading.
Issue 1
August 1998
Page G-2
Advertisement
Table of Contents
