Incoming Trunks: Ds1 Connectivity (100D Module) - Lucent Technologies MERLIN LEGEND Release 6.1 System Planning Manual

MERLIN LEGEND
Form 3b

Incoming Trunks: DS1 Connectivity (100D Module)

Module 1 Slot No. __________
Type of Service
Switch Type
T1 *
4ESS *
†‡
PRI 5ESS
DMS-100
DMS-250
T1 Trunks
Channel
Trunk Type
Number(s)
Ground-Start
Loop-Start
Tie
Unequipped
All Ground-
Start
All Loop-Start
All Tie
All Unequipped
DID
All DID
S56 Data
All S56 Data
Module 2 Slot No. __________
Type of Service
Switch Type
T1 *
4ESS *
†‡
PRI
5ESS
DMS-100
DMS-250
T1 Trunks
Channel
Trunk Type
Number(s)
Ground-Start
Loop-Start
Tie
Unequipped
All Ground-
Start
All Loop-Start
All Tie
All Unequipped
DID
All DID
S56 Data
All S56 Data
NOTE: Do not configure 100D modules to do trunk-to-trunk transfers between DS1 and LS lines/trunks.
Factory Setting
* The factory setting of T1 is not automatically selected if you enter nothing; it must be entered.
† PRI must be selected as the Type of DS1 connectivity before PRI options are entered.
‡ AT&T Toll and 5ESS local PRI service for Release 2.0 and later requires service provider switching equipment to be either
4ESS Generic 13 through Generic 16, 5ESS Generic 6, or a 5ESS serving the FTS2000 network. PRI service on Release 1.0
or 1.1 requires a DS1 facility from a 4ESS Generic 13 through Generic 16 or 4ESS Generic 16 switch.
®
Communications System Release 6.1
(PRI Service Only)
‡
DEX600E
‡ Legend-PBX
Legend-NTWK
For Tie/All Tie
Tie-PBX Toll S56
(PRI Service Only)
‡ DEX600E
‡
Legend-PBX
Legend-NTWK
For Tie/All Tie
Tie-PBX Toll S56
Frame Format
D4 Compatible
Extended Superframe (ESF)
Suppression (Line Code)
AMI-ZCS
B8ZS
Signaling Mode
Robbed-Bit Signaling
(RBS)
Common-Channel
Signaling (CCS)
Line Compensation
__________ Cable Feet
1 (-.6 dB)
2 (-1.2 dB)
3 (-1.8 dB)
4 (-2.4 dB)
5 (-3.0 dB)
Frame Format
D4 Compatible
Extended Superframe (ESF)
Suppression (Line Code)
AMI-ZCS
B8ZS
Signaling Mode
Robbed-Bit Signaling
(RBS)
Common-Channel
Signaling (CCS)
Line Compensation
__________ Cable Feet
1 (-.6 dB)
2 (-1.2 dB)
3 (-1.8 dB)
4 (-2.4 dB)
5 (-3.0 dB)
Clock Synchronization
Priority
Primary
Secondary
Tertiary
None
Source
Loop
Local
Activation
Active
Not Active
Channel Service Unit
Foreign Exchange
Special Access
Clock Synchronization
Priority
Primary
Secondary
Tertiary
None
Source
Loop
Local
Activation
Active
Not Active
Channel Service Unit
Foreign Exchange
Special Access
Form 3b-1