Lucent Technologies MERLIN LEGEND Release 6.1 System Planning Manual page 547

MERLIN LEGENDCommunications System Release 6.1
System Planning 555-661-112
Glossary
AT&T Switched
Network
AUDIX Voice
Power
Automated
Attendant
Automated
Document Delivery
System
automatic
immediate cycling
Automatic Line
Selection
Automatic Number
Identification
automatic
ringdown tie-trunk
Automatic Route
Selection
automatic-start tie
trunk
auxiliary power
unit
B
B8ZS
backup
bandwidth
See ASN .
A voice-processing application, part of IS II/III , that provides
Automated Attendant, Call Answer, Information Service,
Message Drop, Voice Mail, and, optionally, Fax Attendant
System for use with the system.
IS II/III , MERLIN LEGEND Mail , and Lucent Technologies
Attendant application that automatically answers incoming
calls with a recorded announcement and directs callers to a
department, an extension, or the system operator.
See ADDS .
Process that occurs in private network when all available
routes for a call specify systems with matching switch
identifiers . The call is routed from the originating system to
the destination system and back to the originating system
in a continuous loop. Switch identifiers labelling systems
must be unique across a network.
See ALS .
See ANI .
See automatic-start tie trunk .
See ARS .
Tie trunk on which incoming calls are routed to an operator
or other designated destination without a start signal, as
soon as the trunk is seized; the destination is specified
during programming. Also called "automatic ringdown" or
"auto-in" tie trunk.
Device that provides additional power to the system.
(bipolar 8 zero substitution) Line-coding format that
encodes a string of eight zeros in a unique binary sequence
to detect bipolar violations.
Procedure for saving a copy of system programming onto a
floppy disk or memory card . See also restore.
Difference, expressed in hertz, between the highest and
lowest frequencies in a range that determines channel
capacity.
Issue 1
August 1998
Page GL-3