Lucent Technologies MERLIN LEGEND Release 6.1 System Planning Manual page 427

MERLIN LEGEND ® Communications System Release 6.1
Form 8a
Transfer Options**
†
Return Time Interval
4 rings
0 rings
_____ rings (1–9)
One -Touch Call Handling
One-Touch Transfer
Manual Completion
Automatic Completion
One-Touch-Hold
Transfer Audible
Music On Hold
Ringback
Type of Transfer
Voice button
Ring button
Camp-On Return Time
90 seconds
_____ seconds (30–300)
Call Park Return Time
180 seconds
_____ seconds (30–300)
Automatic Callback Interval
3 rings
_____ rings (1–6)
Extension Status
Hotel
Assign to operator positions
______ ______ ______ ______
______ ______ ______ ______
Group Calling/CMS
Note: If you use equipment that rebroadcasts music or other copyrighted material, you may be required to obtain a copyright
license from, and pay license fees to, a third party such as the American Society of Composers, Artists, and Producers
(ASCAP) or Broadcast Music Incorporated (BMI). Or you can purchase a Magic-on-Hold system, which does not
require you to obtain such a license, from Lucent Technologies or an authorized representative.
Factory Setting
* Beginning with Release 2.1; calls received on personal lines with Do Not Disturb on will go immediately to Coverage instead
of waiting for the Cover Delay Interval.
† If the system has AUDIX Voice Power/FAX Attendant System, Integrated Administration will automatically set the Return Time
Interval to "6."
‡ For systems where the majority of lines are PRI, the SMDR Call Length should be one second.
** Transfer features (and any feature that requires more than one SA button) can be disabled on single-line telephones by
removing all but one SA button via Centralized Programming.
§ Hybrid/PBX mode only
System Features
SMDR Options
Call Report Format
Basic
ISDN
Calls Reported (non-UDP)
Incoming and outgoing
Outgoing only
Talk Time
Enabled
Disabled
Inside Dial Tone
Inside
Outside
Reminder Service Cancel
No
Yes, _____ time of day
Calls to Unassigned Extensions
QCC Queue _________
Extension , No. __________ (default is the
primary operator extension)
Calling Group, Extension No. __________
Recall Timer
350 ms
450 ms
650 ms
1 sec
Rotary
Delay
No Delay
Call Length ‡
40 seconds
_____ seconds (0–255)
Calls Reported (UDP)
Incoming and outgoing
None
§
Form 8a-1