Programming From A Pc With Spm; Exiting System Programming - Lucent Technologies MERLIN LEGEND 6 System Manager's Manual

MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6 Managing the System

Programming from a PC with SPM

YYYY YYYY
Make a selection.
! 

Exiting System Programming

Use the information in
main menu (Menu Mode screen), or the Home screen.
Table 6–5.
To return to:
Previous menu
(or, in some
cases go to the
next item to
program)
Main menu
Normal call
handling
Programming from a PC with SPM
The System Programming and Maintenance (SPM) software package offers an
alternative method of programming using a PC. This method frees the system
programming console for other uses and also provides additional functions. Using
a PC with SPM enables you and qualified service personnel to program the
system from off-site locations.
SPM runs on a DOS-based PC as a standalone package, or on a UNIX System
platform with Integrated Solution II or Integrated Solution III (IS II/III, no longer
available).
2SHUDWRU
YYYY YYYY
Select
Press the button or function key next to
your selection.
Table 6–5
Exiting System Programming
On the console press:
([LW
Menu
Home
= Position extension numbers
([LW
6
to return to the System Programming menu, the
Ç
On the PC press:

'
6
Issue 1
February 1998
Page 6-18