Setting Dialing Pattern Routing - Altigen AltiWare OE Version 4.6 Administration Manual

Setting Dialing Pattern Routing

Setting Dialing Pattern Routing
You can use the Dialing Pattern window to create or disallow routing for
specific dialing patterns.
As noted in "About Restricting Outgoing Calls" on page 9-1, there are three
AltiWare functions to restrict outcalls, of which the Call Restriction setup
of System Configuration takes precedence.
The Dialing Pattern window provides for setting up blocks with specific
exceptions. For example, you could use this window to block calls that
begin with 767, but to accept and route calls to 767-2676, by disallowing a
"767" entry while setting up and providing routing for a separate
"767-2676" entry.
Click the Dialing Pattern tab on the Out Call Routing Configuration
window to display a Dialing Pattern window.
Figure 4. Dialing Pattern window, Out Call Routing Configuration
9-6 AltiWare OE System Installation & Administration Manual