Table of Contents
Advertisement
Software Installation
To install AltiAdmin on a non-AltiServ PC for the first time:
1.
Insert the AltiWare CD-ROM into the appropriate drive.
2.
Run SETUP.EXE from the AltiAdmin folder.
3.
Follow the instructions on the window.
4.
To open AltiWare Administrator, refer to "Running AltiWare
Administrator" on page 3-45.
Running AltiWare Administrator
To run AltiWare Administrator:
1.
Choose Programs from the Windows NT Start button and click on
AltiWare Administrator in the AltiWare or AltiAdmin folder.
2.
If you are opening AltiAdmin, enter the server name when prompted.
If you are logging into AltiAdmin at a remote site to administer
AltiServ over the Internet, enter the IP address (e.g. 100.100.100.100)
of the AltiServ system when prompted for the server name. Multiple
AltiServ systems can be managed at a single location with an
AltiAdmin open for each AltiServ system.
3.
Login by Selecting the Services
Login icon—the left-most icon in the Toolbar. The Login
Password window prompts you to enter the password and
click OK. The system default password is "22222." You should
change the system password as soon as possible to ensure system
security. For more information, refer to "Logging in for the First
Time" on page 4-1.
Once you are logged in, you can configure the AltiServ system.
Shutting Down AltiServ when Changing or
Adding Hardware
When you add or change hardware, follow these procedures to back up and
shut down the AltiServ system. The best time to do this is during off
hours—the system should be idle.
AltiWare OE System Installation & Administration Manual
Login or clicking the
3-45
Advertisement
Table of Contents
Troubleshooting
