Defining The Ip Dialing Table; Setting The Location Id Digit Length; Defining Remote Locations - Altigen AltiWare OE Version 4.6 Administration Manual

System Configuration

Defining the IP Dialing Table

To access the IP Dialing Table window, select System Configuration... on
the Management menu, then click the IP Dialing Table tab.
Figure 16. Dialing Table window, System Configuration

Setting the Location ID Digit Length

Set the length in the Location ID Digit Length drop-down list, noting the
discussion about the length in the previous section.

Defining Remote Locations

To add a location, click the Add button to open an entry dialog box:
AltiWare OE System Installation & Administration Manual 5-29