Changing The Password; Stopping The Altigen Switching Service - Altigen AltiWare OE Version 4.6 Administration Manual

Getting Around AltiAdmin
The logout option in the Services menu allows the system administrator to
logout of the system. You should always log out after you have completed
the administrative or configuration tasks. This will prevent unauthorized
persons from accessing the AltiWare configuration functions. AltiWare
telephony functions continue to run in the background on the AltiServ.

Changing the Password

Change the password frequently to prevent unauthorized access to the
system. You can change the password only if you're already logged in.
Select Change Password from the Services menu to open a Change
Password dialog box. You'll be prompted type in and verify the new
password and then click OK.

Stopping the AltiGen Switching Service

Normally, when you exit AltiAdmin, the AltiGen services that provide the
various telephony and data services remain active—they are needed to run
the system, of course. If you need to shut the entire system down, select the
Stop Switching Service option from the Services menu. This stops the
AltiWare system services, including the AltiAdmin application itself.
When you re-open AltiAdmin, the switching services are reactivated.
This option is available when you are logged in at the AltiServ system
computer; it is not available from a remote AltiAdmin client.
AltiWare OE System Installation & Administration Manual 4-11