Enabling One Number Access; Setting Caller Id Verification - Altigen AltiWare OE Version 4.6 Administration Manual

Note:
You can use Apply to to apply some ONA settings to one, some,
or all extensions of the same type—physical to physical, huntgroup
to huntgroup, etc., but only if the extensions are ONA enabled in
the Answering window.

Enabling One Number Access

In the One Number Access window, you enable the function by selecting
one of the following options:
• Enabled at any time
• Enabled during business hours only
• Enabled during non-business hours only
• Enabled based on the following schedules
If you select this last option, Enabled based on the following schedules,
you can then select and set up to four different time periods—Schedules 1
through 4—using the From and To time drop-down lists.
After choosing any of the enabling options, you set the Verify Caller ID
and Forwarding choices, and these are discussed below.
Note:
You can also enable and set up One Number Access remotely
through AltiReach.
Disabling One Number Access
You can disable ONA for the extension by clicking the Disable option.
Disabling access in this window does not destroy the data you might have
entered. For example, if you entered a group of Caller IDs to use to identify
the caller, these will be available if you enable access at a future time.

Setting Caller ID Verification

You can select the Verify Caller ID based on the following checkbox and
then type in up to 10 phone numbers in the text boxes. Whenever the system
detects a call from one of the numbers entered here during the selected
schedule, the system searches for you by dialing the numbers configured in
the Forwarding Number fields.
Caution: If ONA is enabled and no numbers are entered for Caller ID
Verification, ONA is available to all callers.
Caller ID verification entries should be complete phone numbers.
AltiWare OE System Installation & Administration Manual
Extension and Group Configuration
8-49