Prerequisites - Altigen AltiWare OE Version 4.6 Administration Manual

Table of Contents

Advertisement

Setting up an Exchange Server
When checking the profiles using the mail icon in the control panel of
AltiServ, you should see one account for each mailbox. You will see
these profiles only if you are logged on as the AltiGen service account
(e.g. AltiGen_telesystem).
Exchange Server 2000 Integration
In the example that follows, the AltiServ system is called ALTIWARE4_1
and the Exchange Server is called GOLDMINE. Both systems belong to
the NT domain called HAPPINESS.
Important: The Windows 2000 server must be the Primary Domain
Controller.

Prerequisites

Two Windows servers:
One Windows NT server with the AltiWare OE software
One Windows 2000 server with Exchange Server 2000 software
Important: When you install the Exchange Server, you must log in as the
Domain Administrator, NOT the Local Administrator.
Also note that the Windows 2000 server must be the Primary
Domain Controller.
AltiServ System Prerequisites
Windows NT 4.0
AltiWare OE software version OE 4.6 or higher
The AltiServ system and the Exchange server system must belong to
the same NT domain.
AltiGen Services should be started with the user account
<Domainname>\AltiGen_<AltiservSystemName>. For example,
HAPPINESS\AltiGen_ALTIWARE4_1.
To check the Windows NT version:
Click the Start button, select Run, and type winver in the Run dialog
box.
This opens an About Windows dialog box that displays the version of
Windows 2000 running on your system. It should say:
14-28 AltiWare OE System Installation & Administration Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Altiware oe 4.6

Table of Contents