Altigen AltiWare OE Version 4.6 Administration Manual page 109

Software Installation
20. Setup will complete, whether or not the MVIP test passes, if Setup
cannot get the results of the MVIP test, or if the MVIP test is skipped.
You can restart your computer now or later, then click Finish to end
Setup.
21. If the MVIP test fails, it is recommended that you address the MVIP
failure before you reboot the system. You can manually run the MVIP
test program through Start>AltiWare>AltiWare Tools>MVIP test.
22. Reboot the system to finish the upgrade process.
AltiWare OE System Installation & Administration Manual 3-27