Defining An Ip Dialing Table - Altigen AltiWare OE Version 4.6 Administration Manual

System Configuration
:
Figure 15. Area Codes window, System Configuration
Adding and Deleting Entries
To add entries to one of the three lists, click Add below the appropriate list
box. In the dialog box that appears, type a number and click OK.
To delete an entry, select it and click Delete. You can select multiple entries
for deletion by using Ctrl-click. Click Apply to save your changes and OK
to save and close the window.
You can type an area code alone, or an area code + prefix if needed. When
you type the area code and prefix, optionally you can connect them with a
single hyphen—for example, 510-487, or 212-677. The optional hyphen is
for your convenience and readability. Using the same examples, 510487
and 212677 are also valid entries.

Defining an IP Dialing Table

To use an AltiServ-to-AltiServ connection for voiceover IP, you need to
configure the routing in the IP Dialing Table for each AltiServ system.
AltiWare OE System Installation & Administration Manual 5-27