Altigen AltiWare OE Version 4.6 Administration Manual page 265

Configure the following hardware extension-specific features:
Parameter
Message Waiting
Signal Type
Caller ID Signal
Format
Receiver Gain/
Transmission
Attenuation
Caution: Use caution in setting the Receiver Gain or the
Transmission Attenuation. If either setting is too high, the
result will be distortion in voice quality.
Triton Analog Station Line Properties
If you select a Triton Analog Station Board extension and click the Line
Properties button, you'll see the Triton Analog Station Line Properties
dialog box. Note that you can use the Apply to... button to apply these
hardware settings to one, some, or all ports on the board.
AltiWare OE System Installation & Administration Manual
Extension and Group Configuration
Description
Type of Message Waiting indicator for the phone set:
• None.
• Voltage—voltage-based indicator.
• FSK—Frequency Shift Keying indicator.
• Tone—tone-based indicator.
Message format with which to send Caller ID
information:
• None
• SDMF—Single Data Message Format for
supporting and sending a single data type, such as
phone numbers.
• MDMF—Multiple Data Message Format for
supporting and sending multiple data types, such
as name and number information.
Incoming and outgoing volume for every
extension. Unlike the Quantum board, these
slide settings have positive and negative values.
Both defaults are 0 decibels.
8-17