Chapter 4: Performing Setup From The Control Panel; Fiery X3E Setup From The Control Panel - EFI KM-C1530 Configuration Manual

4

4-1 Fiery X3e Setup from the Control Panel

Chapter 4:
Performing
Setup from
the Control
Panel
Setup is required the first time the Fiery X3e is turned on after new system software is
loaded. In this initial Setup, you (or the service technician who loads the software)
choose the language for Fiery X3e Control Panel menus and messages. If you do not
configure a particular Setup option, the Fiery X3e uses default settings. Make sure the
settings are appropriate for the printing environment at your site.
Fiery X3e Setup from the Control Panel
Setup performed from the Control Panel configures the Fiery X3e to communicate
with other devices and manage print jobs sent to it.
Setup provides these groups of options:
• Server Setup to specify system options
• Network Setup to specify all the active network systems that transmit print jobs to
the Fiery X3e
• Printer Setup to specify how print jobs and queues are managed
• PS Setup to specify PostScript settings
• PCL Setup to specify PCL settings
• Color Setup to specify color settings
• Job Log Setup to specify how the Fiery X3e handles its log of printed jobs
• PrintMe ™ Setup to specify remote printing options
The Change Password option in the Setup menu allows you to create and change the
Administrator password on the Fiery X3e.