EFI KM-C1530 Configuration Manual page 74

4
4-20 Performing Setup from the Control Panel
Enter Password
Enter the login password for the NDS tree, using the up and down arrow buttons to
select characters, and the left and right arrow buttons to move the cursor. Choose OK.
Navigate NDS Tree to the Print Server.
Choose OK to browse the NDS tree to the Print Server object.
Browsing to find the Print Server object begins with the NDS tree that you selected
previously (with Select NDS Tree). In each subsequent browse screen, the top line
represents your current location. The second line contains:
• A list of objects in the current container directly below your current location
• The symbol ".." to go up one level
With a container object selected, choose OK to travel down the tree, or choose ".." to
go up the tree. When you select an object and choose OK, that object is displayed on
the top line, and the second line lists objects directly below it.
When the Print Server is displayed in the second line, choose OK.
Enter Print Server Password
Enter the Print Server password, using the up and down arrow buttons to enter
characters, and the left and right arrow buttons to move the cursor. Choose OK. (If no
password is required, choose OK.)
Server should look for print queues in:
Entire NDS Tree/Specif. Subtree [Entire NDS Tree]
By default, the Fiery X3e searches the entire NDS tree for Fiery X3e print connections.
This option lets you restrict the search for Fiery X3e print jobs to a subtree (the Print
Queue root) in which the Fiery X3e print connections have been defined. This makes
the search more efficient. Select Entire NDS Tree if the tree is small. Select Specif.
Subtree to restrict the search and specify the subtree.