EFI KM-C1530 Configuration Manual page 59

4
4-5 Server Setup options
Server Name
Default server name
Enter a name for the Fiery X3e (up to 15 characters long). This name appears in the
Chooser on an AppleTalk network.
System Date
Enter the correct system date in the standard form for your use. The date appears on
the Job Log.
System Time
Enter the correct system time. Enter the time based on the 24-hour clock in the form
HH:MM (Hours:Minutes). The time appears on the Job Log.
Time Zone
Specify the correct time zone. Select from a list of major cities and standard time zones.
Print Start Page
Yes/No [No]
Specify whether the Fiery X3e should print a start page every time it restarts. The start
page displays information about the Fiery X3e, including the server name, current date
and time, amount of memory installed in the Fiery X3e, network protocols enabled,
and connections published.
Use Character Set
Macintosh/DOS/Windows [Macintosh]
Specify whether the Control Panel and Command WorkStation should use the
Macintosh, DOS, or Windows character set for displaying file names. This is
important if file names include accented or composite characters (such as é or æ).
For mixed-platform networks, choose the option that gives the best overall
representation of the special characters you use.
Enable Printing Groups
Yes/No [Yes]
Specify whether to enable printer groups for Member Printing. If you enable this
option, you must use Command WorkStation to define user groups and passwords.
Users must then enter their group name and password when they print.