Setting The Weblink Destination - EFI KM-C1530 Configuration Manual

6

6-3 Setting the WebLink destination

Setting the WebLink destination
You can change the pre-set WebLink destination; this function requires the
Administrator password, if one has been set.
T W L
O CHANGE THE EB INK DESTINATION
1. Start your Internet browser.
2. Enter the IP address or the DNS name of the Fiery X3e.
The Fiery X3e home page appears.
3. Click the Fiery WebTools icon in the lower-left corner of the window.
4. Enter the Administrator password, if required, and click OK.
5. Press the Control key (Mac OS) or Ctrl key (Windows) as you click WebLink.
The Update WebLink dialog box appears.
6. Enter the new WebLink address (URL) and click OK.