EFI KM-C1530 Configuration Manual page 12

xii Introduction
• Configuring Novell and Microsoft Windows NT 4.0/2000 servers and UNIX
systems to provide Fiery X3e printing services
• Using the Fiery X3e in mixed network environments
The network guidelines in this book are not intended to replace the services of
N :
OTE
an experienced network engineer.
This manual is organized as follows:
• Chapter 1 illustrates the supported network configurations and shows the network
connectors on the Fiery X3e.
• Chapter 2 provides guidelines for setting up Windows network servers and UNIX
systems for printing to the Fiery X3e and for using WebTools.
• Chapter 3 describes how to prepare for Fiery X3e Setup
system security through access levels.
• Chapter 4 describes Fiery X3e configuration (Setup) from the Control Panel.
• Chapter 5 describes Fiery X3e Setup from a Windows computer.
• Chapter 6 describes setting up the Fiery X3e for Fiery WebTools.
• Chapter 7 summarizes some administrative features of Fiery X3e software that
are available for IPX/SPX, TCP/IP, and AppleTalk networks, and offers
troubleshooting hints.
• Appendix A describes issues that may occur in setting up the Fiery X3e and
offers solutions.
Administrator features described in other manuals are summarized on
N :
OTE
™
, including planning
page 7-1.