Configuring A Netware 4.X Server For Printing - EFI KM-C1530 Configuration Manual

2
2-9 Fiery X3e on a NetWare 4.x or 5.x network
When the Fiery X3e is configured to connect to a NetWare server, it polls the NetWare
server for jobs in each of its queues. If jobs are found, they are automatically transferred
over the network to the matching connection on the Fiery X3e. For example, jobs
from the NetWare queue with the
queue. While a job is processed and printed, a record of the job is being created. You
can access the Job Log containing these records at any time.
Configuring a NetWare 4.x server for printing
The following sections explain how to set up a NetWare file server so networked users
can print to the Fiery X3e from their workstations, and the Fiery X3e can obtain print
jobs from the NetWare server.
For each NetWare file server that you configure, follow these general steps. More detail
is provided in subsequent sections and in your NetWare documentation.
• Make sure the server is connected to a functioning IPX network.
• Log in as the Supervisor on a PC connected to the NetWare file server.
• For NetWare 4.x installations, set up an NDS connection (see
• For NetWare 4.x in emulation mode, set the bindery context (see
• For NetWare 4.x in bindery emulation, set up a file server, print server, and print
queue for the Fiery X3e (see
With bindery services, you can route all Fiery X3e print jobs through the same
NetWare file server, or you can configure more than one file server to handle
Fiery X3e jobs.
The functions you perform on the Novell server, the Fiery X3e, and the client
workstation are summarized in the following tables. The first table applies to NDS
connections, and the second to bindery connections. Complete the operations in the
left column, then the center column, then the right column.
extension are sent to the Fiery X3e Print
_print
page 2-12).
page 2-11).
page 2-11).