EFI KM-C1530 Configuration Manual page 116

5
5-12 Setting up the Fiery X3e from a Windows Computer
TCP/IP
Specify TCP/IP settings. The current settings for IP address, subnet mask, and default
gateway address are displayed. For information about setting up printing with TCP/IP,
see Chapter 2.
The Fiery X3e requires a unique, valid IP address. You can set a static address or specify
that the Fiery X3e obtains the IP addresses automatically.
If you specify the DHCP or BOOTP protocol, the Fiery X3e restarts when you
N :
OTE
save your changes and exit Setup. Allow the Fiery X3e to restart and return to Idle
before printing a Configuration page or proceeding with any other operations.