Chapter 5: Setting Up The Fiery X3E From A Windows Computer; Accessing Setup; Remote Fiery Setup - EFI KM-C1530 Configuration Manual

5

5-1 Accessing Setup

Chapter 5:
Setting up
the Fiery X3e
from a Windows
Computer
T
O ACCESS
1. Start your Internet browser and enter the IP address of the Fiery X3e.
2. Click the Fiery WebTools icon in the lower-left corner of the window.
3. Log in as Administrator.
4. When the Fiery X3e home page appears, click WebSetup.
After you perform initial Setup (Server, Network, and Printer Setup) from the Control
Panel, you can change most Setup options from a Windows computer.
Accessing Setup
In addition to using the Control Panel, you can set up the Fiery X3e remotely. You can
perform remote Setup from a Windows computer using WebSetup or Command
WorkStation.
To use the Setup applications (WebSetup or Command WorkStation), you must enter
the Fiery X3e Administrator password. This is set either from the local Setup at the
Control Panel, or remote Setup from WebSetup or Command WorkStation.

Remote Fiery Setup

Remote Setup is performed from a Windows computer using WebSetup or Command
WorkStation.
W S
EB ETUP