EFI KM-C1530 Configuration Manual page 112

5
5-8 Setting up the Fiery X3e from a Windows Computer
Parallel Port (Port Setup)
—Specify whether you want to print through the parallel port.
Enable Parallel Port
You can connect a single Windows computer to the parallel port and print directly to
the Fiery X3e.
Enabling the parallel port does not conflict with using Ethernet or Token Ring
N :
OTE
communication with the Fiery X3e.
—Available only if Enable Parallel Port is selected, this option
Ignore EOF Character
specifies that the Fiery X3e should ignore end-of-file (EOF) messages. Select this
option to print PostScript files in binary format (not ASCII); under normal circum-
stances, this option should not be selected. When this option is selected, the Fiery X3e
uses the parallel port timeout value to determine when the end of the file has
been reached.
—Available only if Enable Parallel Port is selected, this
Parallel Port Timeout (seconds)
setting determines how long the Fiery X3e waits without receiving data from the
parallel port before deciding that the current job is complete. Until the timeout, the
Fiery X3e cannot receive new jobs through the parallel port, but it can continue to
receive network print jobs.