Chapter 6: Configuring Fiery Webtools; Configuring The Fiery X3E And Clients For Webtools - EFI KM-C1530 Configuration Manual

6
6-1 Configuring the Fiery X3e and clients for WebTools
Chapter 6:
Configuring
Fiery WebTools
T
O SET UP
1. In Fiery X3e Network Setup, enable TCP/IP.
2. Set a valid, unique IP address for the Fiery X3e, and then set the subnet mask.
3. Enable Web Services.
4. In Fiery X3e Printer Setup, confirm that the Print Queue is published.
T
O SET UP
1. Enable TCP/IP networking.
2. Assign the workstation a valid, unique IP address and subnet mask, and a gateway
3. Install an Internet browser that supports the Java language and frames.
Fiery WebTools allow you to manage your Fiery X3e remotely from the Internet or
from your company's intranet. The Fiery X3e has its own home page, from which you
can select a variety of functions, including Status, WebSetup, WebSpooler, WebLink,
Installer, WebScan, and WebDownloader.
For more information on using Fiery WebTools, see the
Configuring the Fiery X3e and clients for WebTools
The WebTools provide access to many Fiery X3e functions via the Internet (or
intranet), providing additional flexibility in remote management. You can access
the WebTools from a Windows or Mac OS computer.
W T F
EB OOLS ON THE IERY
Set a gateway address, if required.
W T
EB OOLS ON A COMPUTER
address, if required.
Make sure Java is enabled. For more information on supported browsers and
WebTools requirements, see the
X3
E
User Software Installation
Printing Guide.
Guide.