EFI KM-C1530 Configuration Manual page 75

4
4-21 Network Setup options
If you select Entire NDS Tree, choosing OK returns to PServer Setup. Proceed with
Bindery Setup (see
PServer Setup to return to the Service Setup menu.
Browse to the root of the Print Queue Subtree.
This message is displayed if you selected Specified Subtree in the previous option.
Choose OK to browse the NDS tree to the Print Queue subtree.
Browsing to find the container object begins with the NDS tree that you selected
previously (with Select NDS Tree). In each subsequent browse screen, the top line
represents your current container. The second line contains:
• A list of objects directly below your current location
• The symbol ".." to go up one level
• The symbol "." to select the current container object (displayed in the top line)
without traveling down the tree
With an object selected, choose OK to travel down the tree, or choose ".." to go up the
tree. When you select an object and choose OK, that object is then displayed on the
top line, and the second line lists objects contained within.
When the container that contains print queues is displayed in the second line, choose
OK. In the next screen, choose "." and choose OK to select the object in the top line.
When the Fiery X3e displays the container name, choose OK to return to PServer
Setup.
Proceed with Bindery Setup (see
choose Exit PServer Setup to return to the Service Setup menu when prompted.
page 4-22), set the Polling Interval (see
page 4-22), set the Polling Interval (see
page 4-27), or choose Exit
page 4-27), or