Pcl Setup Options - EFI KM-C1530 Configuration Manual

4

4-39 PCL Setup options

PCL Setup options
PCL Setup allows you to set defaults to control printer output. These defaults can be
overridden by the user from within an application, but they determine how a job will
be printed in the absence of other information.
PCL printing is supported for Windows computers only. Mac OS computers
N :
OTE
must use the PostScript driver.
T PCL
O ACCESS SETUP OPTIONS
1. In the main Setup menu, choose PCL Setup.
2. Enter the options appropriate to the printing requirements at the site.
3. When you have finished, save changes.
In the list of options that follows, default values, where applicable, appear in square
brackets.
Default Tray
Auto/Tray 4, Tray 3, Tray 2, Tray 2 [Auto]
Specify the default paper tray.
Default Duplex
Off/Top-Bottom/Left [Off]
Select Off for simplex (single-sided) printing. Select Top-Bottom for duplex
(double-sided) printing with the back side upside down. Select Left for duplex printing
with both sides using the same top edge.
Default Copies
1-999 [1]
Specify the default number of copies the Fiery X3e will print for PCL jobs.
Paper Size
A3wide+/A3wide/A3/A4/A5/A6/ISO B4/JIS B4/ISO B5/JIS B5/JIS B6/Hagaki/
12.25x18/12x18/11x17/11x14/Legal/Letter/5.5x8.5/4x6/Exe./FLS1/FLS2/FLS3/
FLS4/C10/C5/DL/Monarch [Letter in the United States, A4 elsewhere]
Specify the default paper size that the Fiery X3e uses to print PCL jobs.