Printme Activation Code; Web Proxy Setup - EFI KM-C1530 Configuration Manual

4
4-45 PrintMe Setup options
PrintMe Setup
Activation Code
PrintMe Setup

Web Proxy Setup

PrintMe Activation Code

Activation Code
This displays the PrintMe activation code. If no activation code is available,
PrintMe is not enabled. You must first enable PrintMe and follow the instructions
on the previous page.
Web Proxy Setup
Specify proxy settings if your network uses a proxy server to access external web sites.
Web Proxy Setup
Proxy Type
None, Auto Detect, HTTP, Socksv4, Socksv5 [None]
Specify the proxy type used.
Proxy Server
Proxy Server By
DNS Name/IP Address [DNS Name]
Select DNS if you Proxy server is assigned a name. Select IP address if no DNS name
is assigned.
By DNS Name
Enter the DNS name of your proxy server. This option appears only if you selected
DNS Name in the previous option.
By IP Address
Enter the IP address of your proxy server. This option appears only if you selected IP
address in the Proxy Server By option.