Passwords From The Control Panel - EFI KM-C1530 Configuration Manual

7
7-3 Setting passwords

Passwords from the Control Panel

For more information on Administrator access privileges, see
information on controlling print jobs with the job management tools, see the
Job Management
The Operator password can be set and changed only from Fiery WebSetup,
N :
OTE
local Setup, or Command WorkStation.
T F X3
O CHANGE THE IERY
1. Scroll through the main Setup menu and choose Change Password.
2. Enter and confirm the password, as follows.
New Password
Use the up and down arrow buttons to select the characters and the left and right
arrow buttons to move between them. Enter characters from left to right, since the left
arrow button is also a Delete key. The password can be any combination of letters and
numbers up to 19 characters. Choose OK when you are done. Be sure to keep track of
the password.
The only way to remove a password that you cannot remember is to reinstall the
N :
OTE
system software.
Verify New Password
Reenter the new password, exactly as you entered it initially. If you make a mistake,
you are prompted to enter the password again. The new password is effective after you
save changes and restart the Fiery X3e.
Guide.
E PASSWORD
page 3-3. For