Fiery X3E On A Netware 4.X Or 5.X Network - EFI KM-C1530 Configuration Manual

2

2-7 Fiery X3e on a NetWare 4.x or 5.x network

• For Windows 2000/XP, in the Client for Microsoft Networks Properties dialog box,
configure the computer to allow file sharing, and then restart the computer.
• Ping the Fiery X3e to verify TCP/IP communication is successful (see
Fiery X3e on a NetWare 4.x or 5.x network
The NetWise
operating environments:
• NetWare 4.x or 5.x—NDS (Novell Directory Services)
• Servers running NetWare 4.x or 5.x in bindery emulation mode
For Ethernet-based networks, the IPX/SPX protocol is supported.
Setting up a NetWare environment correctly requires the presence and active
N :
OTE
cooperation of the Novell network administrator. You must have administrator
privileges on the network to create new NDS or bindery objects.
The term "bindery server" is used to refer to a Novell file server running NetWare 4.x
or 5.x in emulation mode. The term "NDS" is used to describe components of a
NetWare operating system running NetWare 4.x or 5.x in native mode.
NetWare clients print to the Fiery X3e through the Novell network server. Server setup
and client network setup are outlined in this chapter, client printing setup is described
in the User Software Installation
The Fiery X3e can receive print jobs from NetWare clients over Ethernet network
topologies. During Fiery X3e Setup, you select the frame type or types that will be used
for communication between the Fiery X3e and network servers. Frame type refers to
the format of a communications packet; frame types are specified in a startup file when
the NetWare server (or any other workstation) loads its network drivers.
™ features built into the Fiery X3e support the following network
Guide, and printing is described in the
page 2-18).
Printing Guide.