EFI KM-C1530 Configuration Manual page 15

1
1-3 Stages of installation on the network
C
ONNECTION
S
ERVER CONFIGURATION
F X3
IERY E SETUP
C
LIENT SETUP
UNIX
Summary of Fiery X3e network installation
Fiery X3e
Network server
Fiery X3e
Mac OS Windows
Fiery X3e available on the network
Prepare a network node. Connect the Fiery X3e to
the network. If you use a computer running
Command WorkStation software, connect it to
the network.
Configure UNIX, Windows NT 4.0/2000, and IPX
(Novell) servers to specify Fiery X3e print queues
and Fiery X3e users.
No special configuration of AppleShare servers
is required.
On the Fiery X3e Control Panel, configure, at a
minimum, the Server Setup, Network Setup, and
Printer Setup. Configure the remaining Setups.
At each computer from which users print to
the Fiery X3e:
• Install the appropriate printer files and connect
to one or more queues.
• Install Fiery® utilities and an Internet browser
for those computers that will use them.
• Verify the Fiery X3e in the list of printers and
run a test print.