Types Of Setup Screens; Server Setup Options - EFI KM-C1530 Configuration Manual

4
4-4 Performing Setup from the Control Panel

Types of Setup screens

There are two types of Setup options:
Multiple choice
questions
Information
entry options
When you have entered the settings, you must save the changes. You are usually
prompted to do so. If you choose Yes, your settings overwrite previous settings. If you
choose No, your previous settings are retained. If necessary, the Fiery X3e restarts after
you exit from the Setup menu.

Server Setup options

The Server Setup menu lets you specify system information that pertains to the
Fiery X3e and all users. To access the menu, follow the instructions on
When you choose Server Setup, the options appear in sequence, as follows. Default
values, where applicable, appear in square brackets. Words shown in italics indicate
that a product- or site-specific value is displayed.
You are given choices (for example, Yes or No, or a list
of options from which to choose). Only one choice is
displayed at a time. The currently selected (or default)
value appears first.
Use the up and down arrow buttons to scroll through the
choices, and choose OK when the correct information
is displayed.
You must specify the information for your site (the printer
name or IP address). Use the up and down arrow buttons
to scroll through the alphanumeric symbols to make your
selection.
When you enter text, enter it from left to right. The left
arrow button acts as a delete key as well as a cursor-moving
key.
page 4-3.