Service Setup Options - EFI KM-C1530 Configuration Manual

4
4-17 Network Setup options
Network Setup
Service Setup
LPD Setup
Network Setup
Service Setup
PServer Setup

Service Setup options

PServer is a program in the Fiery X3e software that services the Novell print queues
assigned to the Novell print servers set up for printing to the Fiery X3e. When you
choose PServer Setup and enable PServer, you can set up NDS (Novell Directory
Services), Bindery Services, or both. NDS is used with NetWare 4.x; Bindery Services
are used with NetWare 3.x or 4.x in bindery emulation mode.
LPD Setup options
Enable LPD
Yes/No [Yes]
Select Yes to allow lpd printing. For more information, see
Fiery X3e on TCP/IP networks"
PServer Setup options
Enable PServer
Yes/No [No]
Select Yes if you have a Novell network connected to the Fiery X3e.
Choose NDS Setup if your network uses NetWare in native mode. Choose Bindery
Setup if your network uses NetWare in bindery emulation mode.
If your network uses both NDS and Bindery, set up NDS first. If you set up NDS
after Bindery, you will overwrite Bindery Setup.
If your network uses both NDS and Bindery, and uses NetWare servers in bindery
emulation, note that the Fiery X3e cannot service NDS and bindery emulation
servers on the same NDS tree.
"Setting up the
on page 2-17.