Network Setup - EFI KM-C1530 Configuration Manual

5
5-6 Setting up the Fiery X3e from a Windows Computer

Network Setup

Network Setup configures the Fiery X3e to receive print jobs over the networks used at
your site. If the Fiery X3e is configured to enable more than one protocol, it
automatically switches to the correct protocol when it receives a print job. When the
parallel port and one or two network ports are enabled, print jobs can be received over
all ports at the same time.
You can view and specify the following network settings in Network Setup:
• Adapters and ports—view currently configured network adapters and port settings
• Protocols—including AppleTalk, IPX/SPX, and TCP/IP
• Print Services—including LPD printing (TCP/IP), NetWare printing (PServer),
Windows print sharing (SMB), HTTP support (WWW), Internet Printing Protocol
(IPP) printing, and Port 9100 printing
• E-mail Service—specify the Fiery E-mail Service