EFI KM-C1530 Configuration Manual page 92

4
4-38 Performing Setup from the Control Panel
Color Mode
CMYK/Grayscale [CMYK]
Specify whether to print color (CMYK) or Grayscale images to the Fiery X3e by
default. CMYK gives you full color prints. Select CMYK as the Color Mode before
performing calibration on the Fiery X3e. Grayscale converts all colors into shades
of gray.
Print to PS Error
Yes/No [No]
Specify whether the Fiery X3e should print the available portion of a print job when it
encounters a PostScript error. Select Yes to print the portion of the job that was
processed before the error occurred; select No to cancel the print job entirely when a
PostScript error is encountered. Leave this option at No unless you encounter printing
problems.
Allow Courier Substitution
Yes/No [Yes]
Specify whether to substitute Courier for fonts that are unavailable when you
download files to the Fiery X3e, or when you print a document for which you do not
have the corresponding printer font. If this option is set to No, jobs with fonts that are
unavailable on the Fiery X3e hard disk generate a PostScript error and do not print.
This setting does not apply to PDF files; font substitution occurs automatically in PDF
files.
Print Cover Page
Yes/No [No]
Specify whether the Fiery X3e prints a cover page (job summary) at the end of each
print job. If you select Yes, each print job is followed by a page containing the name of
the user who sent the job, the document name, the server name, the time the job was
printed, the number of pages printed, and the status of the job. If a PostScript error
occurs and the Print to PS Error option is set to Yes, the cover page lists the PostScript
error message instead of the job status.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in PS Setup; select No to return to the main
Setup menu without making any changes.