EFI KM-C1530 Configuration Manual page 86

4
4-32 Performing Setup from the Control Panel
RD Admin Domain Name
yourdomain.com
This option appears only if you have selected Yes to the previous option, Enable
Remote Diagnostics. Enter the name of the Fiery domain where the administrator has
an account. This is typically the part of the e-mail address that follows the @ symbol.
For example, in the address pat@test.com , the domain name is test.com . See your
copier documentation for more information.
Outgoing Server
[127.0.0.1]
Enter the IP address of the server on your network that handles outgoing e-mail.
Incoming Server
[127.0.0.1]
Enter the IP address of the server on your network that handles incoming e-mail.
Server Type
POP3/IMAP [POP3]
Choose the type of mail server.
Fiery E-mail User Name
Enter the user name of the e-mail account. This is typically the part of the e-mail
address that precedes the @ symbol. For example, in the address pat@test.com , the
user name is pat .
Fiery E-mail Domain Name
Enter the name of the domain in which the user has an account. This is typically the
part of the e-mail address that follows the @ symbol. For example, in the address
, the domain name is .
pat@test.com test.com
Account Name
Enter the account name. This is the internal name your network recognizes, which is
not necessarily the same as User Name.
Password
Enter the password for the e-mail account.