EFI KM-C1530 Configuration Manual page 87

4
4-33 Network Setup options
Administrator E-mail User Name
Enter the administrator name of the administrator e-mail account. This is typically the
part of the e-mail address that precedes the @ symbol. For example, in the address
pat@test.com
Administrator E-mail Domain Name
Enter the name of the domain in which the administrator has an account. This is
typically the part of the e-mail address that follows the @ symbol. For example, in the
address pat@test.com
The administrator authorizes a unique e-mail address to remotely administer Fiery
E-mail Services via e-mail. If an error occurs while you are executing a scan to e-mail,
the e-mail service sends an error message to that administrator e-mail address. The
administrator can authorize additional e-mail addresses as administrators from this
e-mail address.
Timeout (sec)
30–300 [60]
Enter the length of time, in seconds, the Fiery X3e should try to connect to each
e-mail server before determining that the connection is unsuccessful.
Poll Interval (sec)
1–3600 [15]
If you have enabled auto-checking for new messages in the previous option, enter
the interval in seconds at which the Fiery X3e should automatically check for
new e-mail.
Max Scan File Size
0–15000 [1000]
Specify the maximum file size the Fiery X3e can send scans as an attachment. If the
scan file exceeds this maximum, the file is automatically sent as a URL.
, the administrator e-mail user name is
, the domain name is
.
pat
test.com .