EFI KM-C1530 Configuration Manual page 133

5
5-29 Network Setup
Outgoing Mail Server
appropriate mail server and contact information to the Fiery X3e.
You must define both an Incoming and Outgoing mail server. If an Outgoing
N :
OTE
mail server is not defined, the E-mail Service assumes that the incoming and outgoing
server names are the same.
Timeout (seconds)
Fiery X3e attempts to connect to the mail server.
Polling Interval
e-mail.
Attachment Maximum Size
to send as an attachment. If the scan file exceeds this maximum, the file is
automatically sent as a URL.
Mailbox Account Name
This name tells the Fiery client mail service which account contains e-mail messages
for the Fiery X3e.
The account name entered in this field must first be specified on the mail server
N :
OTE
by the administrator.
Fiery E-mail Address
pat@test.com
—Enter a password for accessing the mailbox account on the mail server.
Password
Verify Password (remote Setup only)
Administrator E-mail Address
The administrator authorizes a unique e-mail address to remotely administer e-mail
services. If an error occurs while you are performing a scan to e-mail, E-mail Service
sends an error message to the Administrator E-mail Address specified. The
administrator can authorize additional administrator e-mail addresses from this
e-mail address.
—Specify the IP address or server name that communicates the
—Specify the maximum amount of time that will elapse as the
—Specify how often the Fiery X3e checks the mail server for relevant
—Specify the maximum file size of a scan for the Fiery X3e
—Enter the mailbox name specified on the mail server.
—Enter the name of the e-mail account. For example,
.
—Reenter your password.
—Enter the user name specified in Fiery X3e setup.