Setting Up Webtools - EFI KM-C1530 Configuration Manual

6
6-2 Configuring Fiery WebTools
T W T
O ACCESS EB OOLS
1. Start your Internet browser.
2. Enter the IP address or DNS name of the Fiery X3e.
3. Press Enter.
The Fiery X3e home page appears.
4. Click the Fiery WebTools icon in the lower-left corner of the window.
5. Click the name of a particular WebTool.
6. Click Configure to enable specific WebTools for users.

Setting up WebTools

In order for network users to access and use WebTools, you must set certain Fiery X3e
options in Network Setup and Printer Setup. You also must prepare each user's
workstation to communicate with the Fiery X3e over the Internet or intranet.
For more information about Network Setup, see
T W T
O SET UP EB OOLS ON THE
1. Set Enable Ethernet to Yes in Network Setup>Port Setup > Ethernet Port Setup.
2. Set Enable TCP/IP for Ethernet to Yes in Network Setup> TCP/IP Ethernet Setup.
3. Set Enable Web Services to Yes in Network Setup >Network Service
Setup>Web Services Setup.
4. Exit Network Setup, and choose OK to Save Changes.
5. Exit Printer Setup, and choose OK to Save Changes.
F X3
IERY E
Chapter 2.